Description
For supporting pieces being flattened, and laying out work. Flat anvil is smoothly finished. Adjustable clamp enables you to use it on benches up to 1 3/4″ (45 mm) thick. Clamp this on any worksurface and you have the basis of a jewelers workbench. Made in India.
The top flat steel anvil measures 2-1/2″ across by 3″ deep. The back of the top flat anvil is slightly curved.
The bench pin is narrow compared to other bench pins we sell being 1-11/16″ (43 mm) in width. The size of the bench pin once installed is 1-11/16 (43 mm) wide by 4-1/4″ (108 mm) long and 7/8″ (22 mm) thick at its thickest point that then tapers down to 1/8″ (3 mm). The bench pin tang is 1-11/16 wide by x 3/8″ thick by 3″ long. The slot is 1-7/8″ (46 mm) wide by 9/16″ (14 mm). The bench pin is most commonly made from Rubberwood harvested in Asia, a good quality medium hard wood that is fast growing and sustainable.
For a replacement bench pin that fits without modifications, we have part number 113.325. See below for a link.
California Prop 65
Reviews
There are no reviews yet.