Description
Half-Round Slim Inside Ring files are tapered in width and thickness coming to a point. Half-round ring files are narrower than regular half-round so that it can be used for filing inside of rings. Cut on both sides. Measurements given are at the thickest point of the file.
Glardon-Vallorbe is the one and only manufacture of files in Switzerland. If a file says Swiss Made, it was and is a Glardon-Vallorbe file.
Things you should know about ordering hand files:
Glardon-Vallorbe Swiss Made Precision Files are measured from the point where the teeth begin to the end of the file. A 6″ precision file will measure 8-1/2″ long from tip to end of tang, but it is called a 6″ file.
Glardon-Vallorbe Swiss Made Precision Files are graded with a number from 000 for coarsest to 6 for finest. Remember, the higher the number the finer the cut.
| Part No. | Legacy Part Nos. | Length-Cut |
|---|---|---|
| LP1566-6-00 | 131.127 & 31.127 | 6″ Cut 00 X-Coarse |
| LP1566-6-0 | 131.128 & 31.128 | 6″ Cut 0 Coarse |
| LP1566-6-1 | 131.129 & 31.129 | 6″ Cut 1 Med-Coarse |
| LP1566-6-2 | 131.130 & 31.130 | 6″ Cut 2 Medium |
| LP1566-6-3 | 131.131 & 31.131 | 6″ Cut 3 Med-Fine |
| LP1566-6-4 | 131.132 & 31.132 | 6″ Cut 4 Fine |
| LP1566-8-000 | N/A | 8″ Cut 000 XX-Coarse |
| LP1566-8-0 | 131.134 & 31.134 | 8″ Cut 0 Coarse |
| LP1566-8-1 | 131.135 & 31.135 | 8″ Cut 1 Med-Coarse |
| LP1566-10-00 | 131.136 & 31.136 | 10″ Cut 00 X-Coarse |
| LP1566-10-0 | 131.137 & 31.137 | 10″ Cut 0 Coarse |
| LP1566-10-2 | 131.138 & 31.138 | 10″ Cut 2 Medium |
| *Length | Max Dimensions |
|---|---|
| 6 Inch (150 mm) | 9.8mm x 2.8mm |
| 8 Inch (200 mm) | 14.8mm x 5.4mm |
| 10 Inch (250 mm) | 14.8mm x 5.4mm |
And in various cuts:
000 Extra Extra Coarse
00 Extra Coarse
00 Coarse
1 Medium Coarse
2 Medium
3 Medium Fine
4 Fine
Reviews
There are no reviews yet.